UAP AC XG
802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4×4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
Main Features :
- four 1×1 clients
- two 2×2 clients
- one 2×2 client and two 1×1 clients
- one 3×3 client and one 1×1 client
The UniFi AC XG AP delivers unprecedented wireless awareness and security, including tools for real-time spectrum monitoring, airtime utilization analytics, and intrusion detection/prevention.
Dedicated Spectral Security Radio: Using a persistent spectral scan, the UniFi XG AP constantly monitors the RF environment to check for both potential malicious activity and the best channel for network performance.
The dedicated security radio allows the UniFi XG AP to scan for security threats, such as malicious frames and rogue access points, while maintaining throughput for client devices. At the same time, UniFi, in conjunction with the UniFi XG AP, analyzes and displays the wireless spectrum and airtime utilization to allow the network admin to have unprecedented real-time visibility into the spectral and protocol usage in the network.
Threat Management: The UniFi XG AP’s dedicated security radio provides persistent threat management to act as a Wireless Intrusion Prevention System (WIPS) and Wireless Intrusion Detection System (WIDS). Such a dedicated radio affords frequency agility – meaning all available Wi-Fi channels are monitored constantly for threats – not just the channels the AP is using.
Spectrum and Wi-Fi Packet Analysis: The airView® tool offers real-time visibility into your RF spectrum. Because it uses the dedicated security radio, it analyzes all of your available RF channels without affecting performance or disrupting client activity. The airTime tool visualizes and analyzes how the APs use channels in real time. The breakdown is by frame type, clients, neighboring APs, protocols, and interference.
Spectrum view and Wi-Fi packet analysis can be done simultaneously, without affecting stations, for a total view of the RF environment and channel utilization.
|Dimensions||228 x 228 x 50 mm (8.98 x 8.98 x 1.97″)|
|Weight||1.20 kg (2.65 lb)|
|Weight With Mounting Kits||1.35 kg (2.98 lb)|
|Networking Interface||(1) 10/100/1000 Ethernet Port
(1) 1/10 Gbps ICM Ethernet Port
|Power Method||802.3bt PoE|
|Supported Voltage Range||44 to 57VDC|
|Power Supply||PoE Injector 50VDC, 1.2A Gigabit|
|Maximum Power Consumption||31W|
|Radios||2.4 GHz, (2) 5 GHz, Security|
|Maximum TX Power||2.4 GHz: 25 dBm
5 GHz: 25 dBm
|Antennas||2.4 GHz: (2) Dual-Port, Dual-Polarity Antennas, 6 dBi each
5 GHz: (2) Dual-Port, Dual-Polarity Antennas, 8 dBi each
|Wi-Fi Standards||802.11 a/b/g/n/ac/ac-wave2|
|Wireless Security||WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
|BSSID||Up to Eight per Radio|
|Mounting||Wall/Ceiling/Junction Box (Kits Included)|
|Operating Temperature||-10 to 60° C (14 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||CE, FCC, IC|
|Advanced Traffic Management|
|Advanced QoS||Per-User Rate Limiting|
|Guest Traffic Isolation||Supported|
|WMM||Voice, Video, Best Effort, and Background|
|Supported Data Rates (Mbps)|
|802.11a||6, 9, 12, 18, 24, 36, 48, 54 Mbps|
|802.11n||6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)|
|802.11ac||6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)|
|802.11b||1, 2, 5.5, 11 Mbps|
|802.11g||6, 9, 12, 18, 24, 36, 48, 54 Mbps|
|Ethernet Speed||10/100/1000 Ethernet|
|Wireless||2.4 & 5 GHz, 2.4 GHz, 5 GHz|